Components
Separate the PCB release BOM, manual modules, and user-selected airframe parts before ordering.
ESPFlight Docs · v1 • Validated v1 documentation path
# Three component groups
Swipe horizontally to see all columns.
| Group | What it contains | Source of truth |
|---|---|---|
| PCB-mounted parts | Resistors, capacitors, diodes, MOSFETs, ferrites, LEDs, buzzer and other PCB parts. | Official Hardware v1.0 BOM. |
| Manual / module items | Wemos D1 mini, MPU-6050, battery connection and related through-hole/header items. | Hardware v1.0 Assembly Notes and board design. |
| Airframe / power selections | Motors, propellers, frame, battery and mounting hardware. | Build-specific; ESPFlight v1.0 does not publish one universal validated model set. |
# Confirmed manual and module items
Swipe horizontally to see all columns.
| Item | Role |
|---|---|
| WEMOSD1MINI | ESP8266 controller module used by the v1 firmware target. |
| MPU-6050 | Reference IMU module. |
| U1 | Through-hole/header connection used by the reference build. |
| BATTERY | Off-board battery/power connection. |
# PCB BOM examples
The official BOM is the ordering authority. It includes parts such as Murata BLM21PG221SN1D ferrite beads, PMEG3020EGWX Schottky diodes, the v1 MOSFET implementation, resistors, capacitors, LEDs and buzzer.
DO NOT SUBSTITUTE BLINDLY
If you change a PCB component, motor system, power architecture, or module, treat the result as a hardware variant and validate it independently.
# Before ordering
Download the official Hardware Reference v1.0 fabrication package.
Check the BOM and Pick-and-Place files against current supplier availability.
Identify every manual/module item that the assembly service will not install.
Choose motor, propeller, frame and battery parts as one matched system; they are not defined by the PCB BOM.
Do not finalize the airframe/power parts yet: complete Airframe & Power Selection first so the motors, propellers, battery, frame, and output stage are evaluated as one system.